This step will ensure everything is well mixed and will eliminate any chance that resin sticking to the sides of the first cup did not get mixed. The best cure for air bubbles is prevention. That is why it is so important to mix and pour your resin slowly.
Shop by category
However, a few air bubbles are inevitable. If you look around, you'll find plenty of tips for getting rid of air bubbles.
- WHAT IS THE SEAL OF THE SPIRIT? (Biblical Studies Series from Self Publishing Innovations - #3)?
- DIY Epoxy Resin Jewelry - A Beautiful Mess.
- Buy Resin Jewellery Kit in Jewellery Making Kits | eBay.
- Resin Jewelry Making Suplies.
I'm sure I've tried them all, and the best strategy is to use a heat gun. Briefly hold the heat gun just above the resin, and you'll see tiny bubbles rise to the top and pop. Follow the manufacturer's instructions for curing times.
How to Make Resin Jewelry in 5 Steps
Generally, your pieces will be cured to the touch in 24 hours, but it takes several days to be fully cured. If you want to drill a hole in your resin jewelry, you must use a hand drill. Do not use a regular drill. Even set at a low speed, a power drill will generate too much heat and melt your resin jewelry. If you'd like to sand your resin jewelry, you can start with more coarse sandpaper grit to sand out large-ish bumps for example, if you want to smooth the edges of a piece that you have not set in a bezel. Be aware that sanding your jewelry will turn the very clear finish into a more cloudy finish, so be certain that this effect is what you want before you start sanding.
You can also polish up your work with a little bit of carnauba wax, which you will also find in the automotive department. I use Mother's brand, which comes in a red bottle, but there are several brands to choose from. Simply cover the resin with a thin layer of carnauba wax. Let it dry for a few minutes, and then use a soft cloth to polish off the excess carnauba wax. Detailed description of all the supplies you'll need for a resin jewelry project.
Since it can be helpful to see a process in action, I've included a series of videos that shows the process of making resin jewelry just scroll down a bit.
Jewelry Resins, Jewelry Clays and Related Supplies | Rings & Things
The music in the videos may start to grate on you a bit, but the instructions are detailed and excellent. I'm Lisa, your craft business guide. If you want to turn your passion for crafts into a business, this site is for you. Resin Jewelry These detailed instructions for making resin jewelry will get you started making gorgeous projects and help you to solve any problems you have encountered. Polyester I use polyurethane casting resin just check the label on the bottle carefully to ensure this is what you are buying.
Steps by Step Resin Jewelry Making Guide Update Since writing this tutorial, I have noticed that some of my resin pieces have yellowed over time, especially the ones with a very clear design. Resin necklace made without a bezel. This helps the resin mix nicely, and helps avoid air bubbles. Be sure to cover your workspace with wax paper — resin does not wash off!
Next, get your fillers ready. We came up with all sorts of good stuff to repurpose, source, print out, and sprinkle for our resin molds.
Use your resin mold to organize your fillers. Cut down what you need to so that you can quickly put everything together once you pour the resin. Mix for two minutes straight and be sure to scrap the sides of your cup often. Mix your epoxy resin. Follow the directions on the package. I tend to use my own disposable cups and spoons as I feel like they do not give you enough in most kits, or they are too small. Once mixed, the epoxy resin is only good to work with for about 20 minutes or so. Fill the molds about half way with the mixed resin. Add your items to the epoxy filled molds. Use toothpicks to push or move the items around so they are evenly spread and under the surface of the epoxy resin.
The Easiest Way to Make Resin Jewelry
I noticed the sprinkles tended to do this. Use a heat gun or kitchen torch to apply some heat to the tops of each piece to remove bubbles. Wait a few minutes and repeat this step, and then another few minutes after that. More bubbles will rise to the surface in between these intervals, and your goal is to remove as many of them as you can. The bubbles will make your piece look cloudy otherwise. After the pieces are set check your epoxy resin package, but probably sometime between hours , remove them from the mold and assemble your jewelry.
Use crazy glue to add pin or ring backs, or flat posts for earrings. Allow to dry before wearing. I like making sets of the same pieces. Anyway, thanks for letting me share! This looks so amazing, and you can do so much with this material!
I was looking for an activity for my nieces birthday party and this is it! Emma your nails look great! I would spell things with those old-school letter beads into a pin!